Precision Electronics Modules.
Designed in Pune. Built for Engineers.
Every module uses genuine Tier-1 components — Texas Instruments ICs, Amphenol connectors, Samsung capacitors, Murata ferrite beads. No clones. No grey market parts. Full traceability.
Power Modules
LDO voltage regulators, ultra-low noise power modules, and load switches. From battery-friendly 50µA quiescent current to 7µVrms laboratory-grade clean power.
TrueVolt74033
General-purpose 3.3V 300mA LDO with 100× lower quiescent current than AMS1117. SD103AW reverse protection. 7805 pin-compatible. The AMS1117 killer.
TrueVolt LN-7A2033
7µVrms noise floor. 95dB PSRR. Dual ferrite bead EMI filtering with solder-jumper configuration. For ADC references, audio, VCO, and RF instrumentation.
PureRail C33 Nano
Laboratory-grade USB-C power. Dual output: filtered 5V (1A) + regulated 3.3V (300mA). Amphenol connector rated 10,000+ mating cycles. TVS + Schottky protection. Current sensing built-in.
PureSwitch-22919
Stop brown-out resets. 1.5A soft-start load switch with quick output discharge, short-circuit protection, and built-in Schottky freewheeling diode for relay control. GPIO-compatible.
Sensor Modules
Analog temperature sensors on aluminum MCPCB for 2× faster thermal response. No I2C, no libraries — direct ADC output. M3 screw mount for secure industrial mounting.
SwiftSense T235
±0.5°C accuracy analog temperature sensor. 10mV/°C linear output — one-line math, no libraries. 9µA quiescent for multi-year battery life. 2× faster thermal response than FR4.
RS-TMP6331-100K
Silicon PTC thermistor — inherently safer than NTC (self-limiting). Ratiometric measurement cancels supply drift. 16.5µA at 3.3V. Schottky diode for direct relay control. Arduino code included.
Interface & Control Modules
Human-machine interface inputs with signal conditioning built in — so your microcontroller reads clean, bounce-free signals with zero extra components.
Bourns Rotary Encoder
24 PPR incremental encoder with push switch, built-in RC hardware debounce and 10kΩ pull-ups on every channel. Ships complete with a premium 6mm D-shaft knob — Arduino, ESP32 & STM32 ready.
Can’t Decide? Start Here.
Browse our technical comparisons and application notes to find the right module for your project.